ayuda con cual box craqueada puedo liberar el zte caribe 4 v769m

[Yuliano Muñoz]

Selected connection metod: FLASH Mode
Exe version:
Selected phone: Blade V2 Lite
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM7)
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6572_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 512 MB  DRAM
----------------------------------------------------
EMMC: (29Gb+4096Mb) HYNIX 0x483447316404
EMMC FW VERSION: 05:00:00:00:00:00:00:00
EMMC CID: 90014A4834473164 : 0000000000000000
EMMC UA SIZE: 0xe9000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0xe9c00000      [3.652 GB]
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM10)
Block Size: 512
IMEI marker was found in nvram
IMEI[1] from NVRAM: 862867021520696
IMEI[2] from NVRAM: fffffffffffffff
If this phone have OTP IMEI, this is normal.
Reading security, wait...
SIM[1]:
Block1(N): Unlocked (remain:4) Code : 12345678
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4©: Unlocked
Unlocking target...please wait.
Unlock finished.
Wait untill phone will start charging.
All done.